The TSX 48 / TSX 48 AF dimmer system is a modern solution meeting today’s requirements for stage lighting control and the latest technical standards. A fully digital control unit enables communication with a control room PC via network protocol. The TSC Diagnostics software allows configuration of the control unit(s) and monitoring of system diagnostics directly from the control center. Intended for permanent installations in theatres, TV studios, etc. Device description The entire system is installed in a distribution cabinet. The LE 24x2 control unit, the SVJ 48 unit sensing the power modules, protective circuits, dimmers and fans are mounted in a 19" frame. The cable entry opening is located at the bottom of the cabinet. The cabinet can be closed with a door glazed over the full height of the 19" frame. The system allows the use of any number of cabinets. Each control unit has its own IP address; units are interconnected via Ethernet and communicate with a PC using TCP/IP. The user thus has access to complete information about the entire system directly from the lighting console. Error messages (circuit without power, circuit without load) and detailed information for each circuit are displayed graphically. Via the touch screen, the user can edit parameters of individual dimmers and the whole system. The system supports saving an arbitrary number of memories and later applying them as preset scenes via pushbutton stations (e.g., auditorium lighting, general scenes in multifunction venues, etc.). TSX 48 modular system features 48× 2.3 kW (24× 5 kW) Product No. 1023120 • Controlled by fully digital control unit LE24×2 • 2× DMX 512 digital input (terminal connection) • Ethernet port RJ-45 • 2 analog outputs • 16 analog inputs • Ability to store custom memories • Trigger preset scenes via external pushbutton stations (6 presets), installable anywhere in the building • Protection: C10 A (2.3 kW) or C13 A/2 (5 kW) • Plug-in dimmer modules with passive and active cooling • Dimmer modules for 2× 2.3 kW and 1× 5 kW loads • Relay switching modules for 2× 2.3 kW loads • IN1, IN2, OUT1, OUT2 indicator LEDs on each module • Active cooling with fan power-failure indication • Ethernet communication TSX 48 AF modular system features 48× 2.3 kW (24× 5 kW) Ethernet Product No. 1023125 • Same features as TSX 48 • Remote administration via PC • Feedback diagnostics with error reporting to the control room • Digital synoptic map communicating with cabinets (optional) LE24x2 control unit features • Phase voltage indication on the display • Start address setting for DMX ports A and B • Assign any DMX address to any dimmer (PATCH) • 8 transfer characteristic curves • Preheat setting 0–10% • Max voltage limit 90–100% • Response time setting: 30 ms, 100 ms, 300 ms • Assign analog inputs to individual dimmers • Behaviour on signal loss: hold last, blackout, fixed value, saved preset • Diagnostics via Ethernet interface • Monitoring and configuration via PC • Locking of set values • Test mode
